50 mm x 90 mm x 20 mm CYSD 7210CDF angular contact ball bearings

Recommended tightening torque for set screw:8 Nm; S:10.9 mm; A:40 mm; s1:21.75 mm; A5:32.6 mm; G1:M24; E:24 mm; SW:3.97 mm; Weight:1.78 kg; G:R1/8";

C:35.1 kN; E:20 mm; J:101.6 mm; S:24.6 mm; N:M16; d:50 mm; T min.:-20 °C; A:54 mm; C0:23.2 kN; T max.:100 °C;

B:25 mm; Brand:NTN; f0:13.1; Fatigue limit load, Cu:1.45 kN; Static load, C0:32 kN; Nlim (grease):7,000 rpm; Min operating temperature, Tmin:-20 °C; Characteristic outer ring frequency, BPF0:3.06 Hz; rs min:1.5 mm; Characteristic inner ring frequency, BPFI:4.94 Hz;

Recommended tightening torque for set screw:5.5 Nm; L:126.5 mm; A:32 mm; T min.:-20 °C; N:11mm; C:12.8 kN; Designation of housing:PLE204N-; d:20 mm; H2:63.7 mm; Weight:0.6 kg;

Designation of bearing:UC217-52G2T04; s1:42.85 mm; T min.:-40 °C; C:83.2 kN; S:34.1 mm; d:82.55 mm; Weight:3.32 kg; B:85.7 mm; C0:63.8 kN; A5:51.6 mm;

C:62 kN; e:38 mm; G:R1/8"; Designation of bearing:EX214-43G2; d:68.26 mm; s1:57.6 mm; N:18mm; d1:96.8 mm; Designation of housing:FE214-; T max.:100 °C;

L:175 mm; Designation of housing:FE212N-; Designation of bearing:EX212G2; d1:82 mm; A:53.5 mm; Weight:5.37 kg; S:30.9 mm; T max.:100 °C; s1:53.2 mm; G:R1/8";

L1:76 mm; d:25.4 mm; N:26mm; H2:62 mm; SW:3.18 mm; C0:11.5 kN; N2:36 mm; S:15 mm; B:38 mm; G:M6x1;

A2:40.2 mm; s1:19.05 mm; S:15.9 mm; Designation of housing:F206N-; L:108 mm; C0:11.2 kN; d:30.16 mm; N:12mm; A1:13 mm; G:M6x1;

Designation of open end cover:SCOE204-12; Z:62.9 mm; H2:64 mm; B1:43.5 mm; C:12.8 kN; T min.:-20 °C; L1:18 mm; d:12 mm; Weight:0.63 kg; L:65 mm;

C:11 mm; Lw:6.3 mm; Category:Bearings; Cr:4.75 kN; Minimum Buy Quantity:N/A; d1:8 mm; Dw:1.5 mm; Characteristic inner ring frequency, BPFI:8.48 Hz; Mass:0.03 kg; Product Group:B04120;

d:50 mm; C:35.1 kN; T min.:-20 °C; G:R1/8"; A1:34 mm; N:M16; S:10.9 mm; B:43.5 mm; A:54 mm; J:101.6 mm;

A:25.5 mm; J:78 mm; Designation of housing:FC204N-; B:34 mm; Designation of bearing:EX201G2; e:10 mm; B1:43.5 mm; H3:62; d:12 mm; A2:36.5 mm;

d1:74.5 mm; S:27.7 mm; T min.:-20 °C; A:43 mm; e:25 mm; Designation of housing:F211N-; C:43.55 kN; B:55.4 mm; B1:71.3 mm; T max.:100 °C;

H1:14 mm; T min.:-20 °C; Designation of bearing:US204G2; S:7 mm; T max.:100 °C; Recommended tightening torque for set screw:5.5 Nm; A:38 mm; B:25 mm; H2:64 mm; Designation of housing:PG204-;